Features

• 10-inch low-frequency PolyPlas woofer
• FreeFlow flared port prevents distortion
• High-output 150-watt amplifier; 250 watts peak dynamic power
• Line level and speaker level inputs with 5-way gold-plated binding posts
• Measures 12-1/4 x 17-3/4 x 14-1/2 inches (W x H x D)

Reviews (4)

Excellent value!
I needed to replace a pair of bookshelf speakers and decided to add the JBL E150P subwoofer to the order since the price was only $179 with free shipping.
DISMAL
This is one audio purchase that I've never stopped kicking myself for...bought it when I was just getting into audio and didn't know any better.
adequate for the money, I *THINK*
Well this subwoofer has a very narrow sweet spot...turn it up too much and it resonates, turn it down too much and you can't hear it.
Read more

Subjects:  1. Electronics    2. Audio   

Features

• Two high powered 4 ohm subwoofers
• Blue neon silhouette woofer rings
• Silver polypropylene cones
• 2" aluminum voice coil
• Bandpass alignment for extra deep bass

Features

• Power Acoustik
• 12 2400 Watt Woofers with Ribbed Cone Insert

Reviews (2)

MOFO-12
Although the information about this sub is somewhat misleading it is quite a good sub.It has an RMS power rating of 1200 watts, and can take 1500 rms just fine.As for the previous reviewer just ignore them, as my $250 Immortal can handle 2,000 RMS and higher.$500 worth of subs can take 5,000 rms and blow your trunk off.
Insufficient Data About the Product
This is not a review of the product,rather an exposure of an example of the incompetence associated w/ amazon.com and Toys 'R' Us.This product discription is a prime example of how many car audio companies will mislead even the retailers concerning their products.To begin with, there is NO 12" round subwoofer that you can purchase for under $800 or more that will handle 2000 watts or more.This subwoofer may very well handle a decent amount of power, and may sound good,but if you put a REAL 2400 watt amplifier on it,and turn it up to slightly over half volume, the only sound you will hear is your voice coil frying.The 2400 watts that this and many other car audio companies refer to is the max power handling.All subwoofers have approximately double max power handling compared to the RMS (root mean square)[average] power handing.This is done so that if the bass hits slightly harder than what the subs are designed for,it will not blow the cone out.
Read more

Editorial Review

Bring the noise with the heavy-duty Dual XNBP12D enclosed subwoofer, which features a carpeted enclosure, plexi subwoofer viewing window, and unique blue illumination. The patent-pending illumiNITE technology constantly illuminates the subwoofer with blue LED lights when it is in use. This box makes a simple and easy add-on for existing systems with no crossovers needed. It provides 600 watts of RMS power and 1100 watts of peak power. Dual's enclosure utilizes a specialized tuned-port computer-aided design to increase the output efficiency. The nailed and glued construction with added bracing is used to eliminate enclosure movement caused by high sound pressure levels. Other features include dual 12-inch Low-Q optimized drivers for loud, accurate bass, four-port dual chamber design, and a mirrored/diamond-plated chamber.Read more

Features

• Single-chamber enclosed subwoofer with dual 12-inch speakers
• illumiNITE technology constantly illuminates the speakers with blue LED lights when in use
• Handles 600 watts RMS power, 1100 watts peak power
• Carpeted enclosure, plexi subwoofer viewing window, mirrored/diamond-plated chamber
• Dual 12-inch Low-Q optimized drivers, four-port dual chamber design

Features

• 1000 Watt Peak / 500 RMS
• Dual 80 Oz Magnet Structure
• 2" VC / 4 Ohms SVC / Poly Cone
• 40Hz-3.5kHz - 92Db
• 1.25 Cu/Ft Recommended Sealed

Features

• 300 Watts Max / 150 Watts Rms
• Poly Cone / 1.5" kapton Voice Coil
• 50 oz Magnet Structure
• Mounting Depth 3.31"
• 38Hz - 5.5kHz

Features

• 12" 4-ohm subwoofer
• aluminum cone with high-roll butyl-rubber surround
• massive cast-aluminum basket
• suitable for free-air use (handles up to 175 watts in free-air applications)
• power range: 75-350 watts RMS (1,400 watts peak power)

Editorial Review

The ButtKicker SSW Silent Subwoofer for Car Audio is in a class of its own. Based on a patented, revolutionary low-frequency transducer design that is very different than voice-coil shakers and other tactile devices, the SSW adds "tactile audio energy" to your vehicle's frame, letting passengers feel the low-frequency audio through their bodies rather than the air. The end result is a bass-heavy sensation that extends down through the stomach and to the ends of each limb, but that won't wake the neighbors as you drive down the street.Read more

Features

• Adds tactile audio energy to vehicle frame, letting passengers feel low-frequency audio through their bodies
• Allows you to dramatically lower speaker volume without sacrificing impact or tone perception
• Mounts directly to your vehicle's frame and/or seating structure, and is virtually indestructible and maintenance free
• Handles frequencies within the 5 to 200 Hz range with an impedance of 2 ohms
• Measures 5.375 x 5.5 x 5.375 inches (WxHxD), and weighs 11 lbs

Features

• Blue injection-molded cone
• High-temperature dual Kapton voice coil
• Chrome-plated basket
• PL-1090BL mounting depth: 6 1/4"
• PL-1290BL mounting depth: 6 1/2"

Features

• Powerful vehicle subwoofer with 12-inch injection-molded cone woofer
• 2.5-inch high-temperature dual Kapton voice coil and flat progressive spider
• Specially treated rubber edge suspension with rubber magnet boot
• Frequency response extends to 23.2 Hz; peak power handling of 1,200 watts
• Mounting cutout of 11.61 inches and 6.52-inch depth; 1-year warranty

Reviews (1)

Great Product!
This Subwoofer sounds great!
Read more

Editorial Review

Built to withstand the toughest marine environments--including always-wet ski and wakeboarding boats--Polk Audio's DB 804 DVC subwoofer offers topnotch low-frequency performance and durability at a wallet-pleasing price. The sub is outfitted with an 8-inch "dish" polypropylene cone woofer that delivers enough rim-rattling bass to make any song sound rich and deep. The woofer is further supported by a vented cone/coil coupler that stiffens the cone, thus ensuring greater mechanical stability and lower distortion. Add in the dual, four-layer Kapton voice coils and the pole piece--both of which are triple vented to withstand high power handling--and you have a powerful, full-bodied sub that satisfies everyone from casual listeners to serious audiophiles. Read more

Features

• Marine-certified subwoofer suitable for use in cars, trucks, boats, and other vehicles
• 8-inch "dish" polypropylene cone woofer delivers powerful, window-rattling bass
• Dual, 4-layer Kapton voice coils with 1.5-inch diameter; 30 to 200 Hz frequency response
• Santoprene surround stands up to harsh temperatures, humidity, and prolonged sunlight exposure
• Mounting cutout diameter of 7.06 inches; mounting depth of 4.56 inches; 3-year warranty

Editorial Review

Built to withstand the toughest marine environments--including always-wet ski and wakeboarding boats--Polk Audio's DB 124 DVC subwoofer offers topnotch low-frequency performance and durability at a wallet-pleasing price. The sub is outfitted with a 12-inch polypropylene cone woofer that delivers enough rim-rattling bass to make any song sound rich and deep. The woofer is further supported by a rigid ABS dustcap that stiffens the cone, thus ensuring greater mechanical stability and lower distortion. Add in the dual four-layer Kapton voice coil formers, the cone/coil coupler, and the pole piece--all of which are double vented to withstand high power handling--and you have a powerful, full-bodied sub that satisfies everyone from casual listeners to serious audiophiles. Read more

Features

• Marine-certified subwoofer suitable for use in cars, trucks, boats, and other vehicles
• 12-inch polypropylene cone woofer with rigid ABS dustcap for powerful, window-rattling bass
• Dual, 4-layer Kapton voice coil with 2-inch diameter; 27 to 200 Hz frequency response
• Santoprene surround stands up to harsh temperatures, humidity, and prolonged sunlight exposure
• Mounting cutout diameter of 11 inches; mounting depth of 6.75 inches; 3-year warranty

Features

• 1200 Watt Peak / 600 RMS
• Dual 80 Oz Magnet Structure
• 2" VC / 4 Ohms SVC / Poly Cone
• 35Hz-3.5kHz - 94Db
• 1.50 Cu/Ft Recommended Sealed

Features

• 400 watts power handling. 4 ohm voice coil.
• 8" Pure-Piston Woofer (this is a fat-surround sub beefier than we have ever seen from Bazooka!)
• Turbo Cooled Voice Coils
• Bass Reflex, Ducted Port Enclosure
• Corner Loading

Features

• Blue electroplated polypropylene ribbed cone
• Strong stamped blue steel frame
• Wide butyl rubber surround with unique pattern
• Large, high temperature Kapton voice coil
• Bumped and vented back plate with extended pole piece

Features

• 60 watts Max. Power
• Frequency Response: 75Hz- 20kHz
• Top Mounting Bracket

Features

• Dual 2 ohm voice coil, Non-pressed paper cone with aluminum rib insert, Large foam rubber surround, 3" BASV/kapton hybrid voice coil, 270 oz magnet, 1-piece EVA gasket, 2400 watts maximum power handling, Chrome screw terminals, Woven tinsel lead through spider, Includes wood case

Editorial Review

Built to withstand the toughest marine environments--including always-wet ski and wakeboarding boats--Polk Audio's DB 124 subwoofer offers topnotch low-frequency performance and durability at a wallet-pleasing price. The sub is outfitted with a 12-inch polypropylene cone woofer that delivers enough rim-rattling bass to make any song sound rich and deep. The woofer is further supported by a rigid ABS dustcap that stiffens the cone, thus ensuring greater mechanical stability and lower distortion. Add in the four-layer Kapton voice coil former, the cone/coil coupler, and the pole piece--all of which are double vented to withstand high power handling--and you have a powerful, full-bodied sub that satisfies everyone from casual listeners to serious audiophiles. Read more

Features

• Marine-certified subwoofer suitable for use in cars, trucks, boats, and other vehicles
• 12-inch polypropylene cone woofer with rigid ABS dustcap for powerful, window-rattling bass
• 4-layer Kapton voice coil with 2-inch diameter; 27 to 200 Hz frequency response
• Santoprene surround stands up to harsh temperatures, humidity, and prolonged sunlight exposure
• Mounting cutout diameter of 11 inches; mounting depth of 6.75 inches; 3-year warranty

Editorial Review

Bring out the serious bass while driving down the highway with the Polk DB 212 dual subwoofer. Outfitted with a pair of 12-inch long-throw polymer composite cone woofers with Butyl rubber surrounds in a single low-resonance housing, the DB 212 thumps with gusto without taking up a ton of excess space (as two separate subwoofers would). The sub is housed in an internally braced 0.75-inch MDF enclosure--the same material used in the world's finest speakers--with an automotive-grade ABS front baffle that's both rigid and impact-resistant. A sheet of Elastomeric damping material further isolates the ABS trim from the baffle, thus acting as a sealing gasket for the woofers. As a result, listeners won't have to suffer through unwanted rattles and resonance, but will instead enjoy tight, powerful bass with minimal distortion. Read more

Features

• Dual vehicle subwoofer with pair of 12-inch long-throw polymer composite cone woofers in single housing
• Low-resonance, internally braced 0.75-inch MDF enclosure with automotive-grade ABS front baffle
• Patented PowerPort technology reduces turbulence to create higher bass output with minimal distortion
• 20 Hz to 200 Hz frequency response; heavy-duty wheel-style ABS grilles; peak power handling of 1,500 watts
• Measures 34.12 x 16.5 x 17.12 inches (W x H x D) and weighs 81 pounds; 1-year warranty

Features

• 450 watt peak, 150 watt RMS
• 10'' anodized injection molded polypropylene cone
• Inverted style dustcap
• 40 oz. Magnet