Features

• Turns your SCSI device into a FireWire device
• Quick and easy plug-and-play installation
• Supports up to 20MB/sec data transfer

Reviews (1)

Not as good as the manufacturer would have you think
Never got the FR1SX to work under Mac OS X with Retrospect and a VXA-1 tape drive. It would begin to work but after a while Retrospect would throw an error and the backup failed.
Read more

Features

• Compatible with most PCI Power Macintosh
• Conveniently co-exists with SCSI and other pre-existing devices
• Supports all types of DMA drive protocols
• Achieve a maximum data transfer rate of 133 Mbps
• Add up to 4 internal ATA/IDE hard drives

Reviews (8)

Works Great.Does EXACTLY What it Says.
This is the ONLY ATA/133 PCI card I could find that worked perfectly with my Apple G4.I had the classic problem where I wanted to upgrade to a larger hard drive, but my G4 wouldn't recognize drives larger than 200+ Gigs.This product is PLUG 'N PLAY.I had absolutely no problems... just ran my Disk Utility, formatted the drive, and it appeared right on my desktop.I won't give it 5 stars because, in comparison to other ATA/133 PCI cards, it's a little pricey.But, hey... Mac always makes you pay the big bucks if you want to upgrade...

ATA-133 Tempo ATA/133 PCI card for Mac
I purchased the card originally to go in an older G3 B&W which would not run the larger hard drives.I had tried several other boards for the PC, but the Mac would not recognize any of them.This was pricy compared to the other PC only cards, but the advertisement said it would work in a Mac.When it arrived, I plugged it in and turned on the Mac.Nothing unusual happened, and I wondered if it was working.I checked under system profiler, and it saw the card!So I turned off the computer, got my 200 MB HD, plugged it in using Master/Slave settings (as a Master) settings, and turned it back on.The HD was seen on the first try.No set up or fiddling with FDISK or anything.It needed to be initialized, but Disk Utility came up and asked if I wanted it initialized, and I said YES, and it did its thing.I then partitioned it into 3 partitions, and put another boot sector on one of the partitions, and now I had an emergency boot disk! Nothing could be simplier!
Very happywith performance and customer service!!!
The product installed easly and worked as designed. I did have one question that I directed to there customer service Dept. and it was answered in under 1 minute and I was fully functional. Would buy again... ... Read more

Reviews (2)

Great RAID controller!
I've got the ADST114 RAID controller hooked up to 4 SATA drives on my home server, and have had no problems at all; everything works just as it should. Installation was a breeze. Note if you are using new drives most likely you'll need to format them. You can do this by going to start and hitting run, then typing in "%SystemRoot%\system32\compmgmt.msc /s", clicking storage, then diskmanagement. Quality RAID controller.

ADDONICS SATA 4-PORT RAID CONTROLLER ( ADST114 )
This card delivers what it promises. I used it to connect my two SATA-150 80GB hard drives on stripping. For the note one HD is Maxtor and the other is Seagate. It works like a breeze. I have used it for a month now and haven't had any problems yet. I use it for HD intensive gaming (DOOM3, HL-2, Area 51, Vampire-Blood lines and the king of all FAR CRY). This setup has give me additional performance in terms of video editing as well. I recommend this card for anybody who is starting on RAID. The card is worth every penny. ... Read more

Features

• Card connects SCSI devices to PC
• 10 MB/sec data transfer rate
• Compatible with older SCSI peripherals as well as newer SCSI
• Connect up to 7 SCSI peripherals with one card
• Five year manufacturing and materials warranty

Reviews (9)

EASY and No Issues
I purchased this card because I upgraded my ASUS Mother Board. The new board had no ISA slot that had been used by my previous HP provided card. The Adaptec card fit easily into one of the new board's PCI slots. Windows XP Pro found the new hardware and configured my ScanJet 4P (HP scanner) for immediate use! This was the easiest upgrade I have ever done. Thanks for providing another fine card to assist with upgrading to faster platforms.

Tough Instalation, No Tech Support
By far, this is the worst product experience I have ever had.After installing in my computer, my SCSI drive could no longer be read.I contacted Adaptec customer support and they refused to help me until I could get an ID number off the card that I could not get until I booted.I pulled out the card to get the ID number and it fried my motherboard. Better than expected
Adaptec continues their reputation for solid design and performance.Read more

Reviews (1)

Mis-leading
The specifications state that the board is compatible with SUSE 9.
Read more

Reviews (5)

Works well
Works well with 2 160G Western Digital Drives in FreeBSD 5.4 in RAID1.

Bad linux drivers support.
Work's well in my Windows 2000, doesn't work with Linux 2.6 kernels.
Greased Lightning! RAID 0+1 WORKS!!!
FAST is the word! This is precisely what I wanted. I needed to secure data on a 'server' that was also being used as a main computer system. I did not want it slowed down AND I wanted to secure my data.Read more

Features

• (2) Internal 68-pin for LVD SCSI
• Also supports Fast SCSI and SCSI-1 devices

Features

• 160 MByte/sec performance
• SpeedFlex technology ensures top performance of all connected devices, regardless of SCSI generation
• Seamless backwards compatibility protects legacy devices
• Industry-leading compatibility, reliability
• CRC (Cyclical Redundancy Checking) improves data integrity

Reviews (1)

Very Fast Database Processing
I steped up from the the older 2940 on a 450mhz machine to a 800mhz with the 29160. The processing speed for accessing data was 20 times faster. I'm very happy and upgrading my other development machines to this product ... Read more

Features

• Cost-effective storage connectivity and data protection
• 2-port native Serial ATA RAID controller
• 48-bit LBA supports drive sizes larger than 137GB
• Low-profile form design
• Bootable array support

Features

• Controller Cards Serial ATA Controllers

Features

• Connect 2 high-speed USB 2.0 devices to your notebook computer
• Fully compatible with USB 1.1
• Includes USB 2.0 drivers for Windows operating systems
• No external power supply needed in most cases
• 5-year warranty

Reviews (12)

Doesn't work with flash drives.Avoid this one.
Because this card DOES NOT come with a power adapter (the Belkin Cardbus card does, and I'm ordering one after I send this one back) it would not work with my flash drives.One it would not see at all, and the other it would see but not access.
Excellent product
I bought this item after a bad experience with an ADS Technologies card (see my review for that one) that did not work. At first I was hesitant to shell out the cash for the Adaptec, but I was so desperate to find a USB2.0 PCMCIA card that did NOT require an AC adapter.
Good Product ( required extra work)
Here what I had to do to get the adapter to work:
Read more

Features

• The Adaptec APA-1460 is a SCSI adapter that permits Windows based notebook PC units to interface with SCSI peripherals
• Fits into an available PCMCIA Type2 expansion slot that is available on most notebook computers and some Palmtop devices
• Performs up to 6 times faster than a parallel port
• Works with Windows3.1 / Windows95 / Windows98 / WindowsNT / WindowsCE 2.x
• Up to 7 SCSI peripherals may be connected via daisychain wiring

Features

• MODEL- CB-SA0311-S1 VENDOR- SIIG FEATURES- eSATA to SATA I Cable- 1 meter (3.28 ft) Designed to connect eSATA external drives/enclosures to SATA I enabled systems or vice-versa. Works with SIIG eSATA products and standardize to work other brand name eSATA products. Extra shielding and metal contacts provide better EMI protection. Connector: eSATA to SATA I support@siig.com MANUFACTURER WARRA

Features

• One Channel Ultra160
• 64-bit/66 MHz PCI
• 32MB onboard cache memory
• Low-profile design
• Optional low-profile bracket included